Danfoss Scroll Compressor 1PH R407C R22 PVE Oil Stub Tube - HRP040T5LP6

Danfoss Scroll Compressor 1PH R407C R22 PVE Oil Stub Tube

Part Number: HRP040T5LP6

Danfoss Scroll Compressor 1PH R407C R22 PVE Oil Stub Tube

Part Number: HRP040T5LP6
Danfoss

Sign in to your Aire-Biz account to view pricing and stock levels.

Sign in

Not an Airefrig customer? Complete our online account application form here to apply for a credit account.

  • Danfoss H-Series Scroll Compressors are 100% gas cooled & fitted with an automatic reset line break protector mounted internally on the motor windings. 

    The internal protectors respond to over-current, overheating & are designed to interrupt motor current under a variety of fault conditions such as failure to start, running overload & fan failure etc. 

    If the internal overload protector trips it must cool down to approximately +60 degrees Celsius to reset. (Depending on the ambient temperature this may take up to several hours) 

    Three Phase Sequence & Reverse Rotation Protection 

    The compressor will only operate properly with the correct rotation. If a three phase compressor is wired incorrectly it will run but will have excessive noise, no pressure differential between suction & discharge, plus the suction will become warmer rather than cooler. 

    The smaller range of Danfoss H-Series scroll compressors (up to HLP075) are able to run in reverse rotation safely for up to 150 hours without damaging the compressor, however phase monitors are still recommended. 

    The larger range of Danfoss H-Series scroll compressors (HLP078 onwards) should never be run in reverse. Danfoss recommends phase rotation protection should always be fitted to prevent these compressors from operating in reverse rotation. 

    Single Phase Compressors – Reverse Rotation 

    Brief power interruptions may cause reverse rotation of single phase scroll compressors. The internal protection will stop the compressor & once cooled down will restart with correct rotation. 

    Crankcase heaters are recommended on all stand-alone compressors & split systems. The heater should be energised for a minimum of 12 hours before initial start up (compressor service valves opened) & must remain energised whenever the compressor is off. 

    External High Pressure Switches are required for HCP094,109,120 scroll compressors as these models are not equipped with internal pressure relief valves. 

    Note: Crankcase heater is not supplied with compressor & should be purchased separately if required.

     

  • General Specifications
    Nominal HP3.3 HP
    Displacement9.5 m³/Hr
    Swept Volume54.4 cm³
    Suction Line ConnectionStub Tube 3/4" ODF
    Discharge Line ConnectionStub Tube 1/2" ODF
    Weight32 kg
    Oil Charge1.06 L
    Oil TypePVE Oil 320HV
    Electricsround electrical box with spade terminals
    Electrical Specifications
    Voltage220-240/1/50
    Motor TypePSC
    Max Continuous Current25 amps
    Locked Rotor Amps97 amps
    Rated Load Amps16 amps
    Crankcase Heater 140watt, 230volt

    1. Crankcase Heaters are not supplied with compressors & should be purchased separately if required

  • Crankcase Heater120Z0055
    Run Capacitor120Z0051
  • danfoss_scroll_dim_1

    Units Dimensions (mm)
    D165
    H413
    H1250
    H2379
  • R22
    Cond Temp (°C)Evaporating Temperature (°C)
    -15-10-5057.210
    45Capacity (w)4424554668748386100631086511885
    Input (w)2621256625292504248424752463
    Current (Amps)11.6811.5711.5311.5211.5111.4911.47
    50Capacity (w)401551456464794995831035811344
    Input (w)2941285227922752272827212711
    Current (Amps)12.8712.6912.6112.5812.5712.5712.56
    55Capacity (w)4660598474599064981910780
    Input (w)319230983035299629872976
    Current (Amps)13.9813.8613.8113.8213.8313.84

    Note:

    Rating Conditions 11.1k Superheat, 8.3K Subcooling
    R407C
    Cond Temp (°C)Evaporating Temperature (°C)
    -15-10-5057.210
    45Capacity (w)409652066504802197921069711849
    Input (w)2615259025712548251424912461
    Current (Amps)12.1312.0411.9311.8111.6711.611.5
    50Capacity (w)378448326060749991821004511143
    Input (w)2963292929022873283628122782
    Current (Amps)13.6513.5113.3813.2513.1113.0512.97
    55Capacity (w)4437558869448535935310395
    Input (w)333532973260321631903157
    Current (Amps)15.2915.1214.9614.8214.7614.69

    Note:

    Rating Conditions 11.1k Superheat, 8.3K Subcooling

My Comparison List

Compare Clear all
Sorry, you can only compare products from the same category.