Danfoss Scroll Compressor 1PH R407C R22 PVE Oil Stub Tube - HLP068T5LP6

Danfoss Scroll Compressor 1PH R407C R22 PVE Oil Stub Tube

Part Number: HLP068T5LP6

Danfoss Scroll Compressor 1PH R407C R22 PVE Oil Stub Tube

Part Number: HLP068T5LP6
Danfoss

Sign in to your Aire-Biz account to view pricing and stock levels.

Sign in

Not an Airefrig customer? Complete our online account application form here to apply for a credit account.

  • Danfoss H-Series Scroll Compressors are 100% gas cooled & fitted with an automatic reset line break protector mounted internally on the motor windings. 

    The internal protectors respond to over-current, overheating & are designed to interrupt motor current under a variety of fault conditions such as failure to start, running overload & fan failure etc. 

    If the internal overload protector trips it must cool down to approximately +60 degrees Celsius to reset. (Depending on the ambient temperature this may take up to several hours) 

    Three Phase Sequence & Reverse Rotation Protection 

    The compressor will only operate properly with the correct rotation. If a three phase compressor is wired incorrectly it will run but will have excessive noise, no pressure differential between suction & discharge, plus the suction will become warmer rather than cooler. 

    The smaller range of Danfoss H-Series scroll compressors (up to HLP075) are able to run in reverse rotation safely for up to 150 hours without damaging the compressor, however phase monitors are still recommended. 

    The larger range of Danfoss H-Series scroll compressors (HLP078 onwards) should never be run in reverse. Danfoss recommends phase rotation protection should always be fitted to prevent these compressors from operating in reverse rotation. 

    Single Phase Compressors – Reverse Rotation 

    Brief power interruptions may cause reverse rotation of single phase scroll compressors. The internal protection will stop the compressor & once cooled down will restart with correct rotation. 

    Crankcase heaters are recommended on all stand-alone compressors & split systems. The heater should be energised for a minimum of 12 hours before initial start up (compressor service valves opened) & must remain energised whenever the compressor is off. 

    External High Pressure Switches are required for HCP094,109,120 scroll compressors as these models are not equipped with internal pressure relief valves. 

    Note: Crankcase heater is not supplied with compressor & should be purchased separately if required.

     

  • General Specifications
    Nominal HP5.7 HP
    Displacement16.2 m³/Hr
    Swept Volume93.08 cm³
    Suction Line ConnectionStub Tube 7/8" ODF
    Discharge Line ConnectionStub Tube 1/2" ODF
    Weight41.1 kg
    Oil Charge1.57 L
    Oil TypePVE Oil 320HV
    Electricsround electrical box with spade terminals
    Electrical Specifications
    Voltage220-240/1/50
    Motor TypePSC
    Max Continuous Current40 amps
    Locked Rotor Amps130 amps
    Rated Load Amps25.6 amps
    Crankcase Heater 150watt, 230volt

    1. Crankcase Heaters are not supplied with compressors & should be purchased separately if required

  • Crankcase Heater120Z0057
    Run Capacitor8173234
  • danfoss_scroll_dim_2

    Units Dimensions (mm)
    D184
    H455
    H1280
    H2422
  • R22
    Cond Temp (°C)Evaporating Temperature (°C)
    -15-10-5057.210
    45Capacity (w)762795661185614463173551873820498
    Input (w)4261422541994177415341384120
    Current (Amps)20.220.1720.1420.1120.1120.1220.14
    50Capacity (w)689788471111513670164781781019506
    Input (w)4796473246884658463746284617
    Current (Amps)22.5922.4922.4222.3722.3722.422.43
    55Capacity (w)79861026012789155401683418480
    Input (w)533052605215518851815173
    Current (Amps)25.2925.1625.0925.0925.1225.16

    Note:

    Rating Conditions 11.1k Superheat, 8.3K Subcooling
    R407C
    Cond Temp (°C)Evaporating Temperature (°C)
    -15-10-5057.210
    45Capacity (w)712990621132113962170441861920624
    Input (w)4294425542244186413040924043
    Current (Amps)21.4121.2521.0620.8520.620.4720.3
    50Capacity (w)658484091054513049159791748019391
    Input (w)4841478847454699463745984548
    Current (Amps)24.123.8523.6223.3923.1523.0422.9
    55Capacity (w)7719972312081148491627318085
    Input (w)542653665305523351905135
    Current (Amps)2726.6926.4126.1626.0525.92

    Note:

    Rating Conditions 11.1k Superheat, 8.3K Subcooling

My Comparison List

Compare Clear all
Sorry, you can only compare products from the same category.