Enthalpy TD Semi Cond Unit- 3Ø 6HP. Oil Reg. CMRC CapCon - TD4EES6MP273LLCM

Enthalpy TD Semi Cond Unit- 3Ø 6HP. Oil Reg. CMRC CapCon

Part Number: TD4EES6MP273LLCM

Enthalpy TD Semi Cond Unit- 3Ø 6HP. Oil Reg. CMRC CapCon

Part Number: TD4EES6MP273LLCM
Enthalpy

Sign in to your Aire-Biz account to view pricing and stock levels.

Sign in

Not an Airefrig customer? Complete our online account application form here to apply for a credit account.

  • Enthalpy TD Semi-Hermetic Condensing Units

    Airefrig Australia’s range of Enthalpy condensing units is one of the highest quality units available for the Australian market. The condensing units have many standard fitted features, previously being options.

    The condensing units are rated to 43 ambient and are fitted with a fan speed controller. This means they can be applied in the hot climate of far North Queensland to the cooler areas of Tasmania.

    The Enthalpy condensing unit is the most complete condensing unit available saving time in installation for contractors.

    Standard Fitted Features:

    • Weatherproof White Powder coated unit casing
    • Semi-Hermetic Bitzer Compressors
    • Compressor oil sight glass
    • Crankcase Heater
    • HP/LP Control
    • Gomax Flexible Control Hoses
    • Liquid Line Drier & Sight Glass
    • Oil separator (Pre-charged with Poe oil)
    • Liquid Receiver• Supercoatcondenser treatment (5000 Hour Salt Spray Test)
    • Top Discharge High Ambient Condenser
    • Space saving unit design (Can be installed into a corner or back to back)
    • ebm-papst condenser Fans – single Phase
    • Saginomiya Condenser Fan Speed Controller
    • 3PH Contactor & Electronic Motor Protection Relay
    • Phase Loss & Phase Imbalance Protection
    • Dust & Weatherproof Electrical Box
    • Pre-Wired Back to Electrical Box
    • 1.22mm (18G) Interconnecting Copper Pipe Work
    • Pre-Drilled ready to fit IPW series isolating switch
    • Discharge Vibration Eliminator
    • Suction Accumulator
  • Condensing Unit Specifications
    Weight280 Kg
    Liquid Line Connection5/8 "
    Suction Line Connection1-1/8 "
    Receiver Capacity R404A12 Kg
    Compressor
    Nominal HP5.5 HP
    Max Continuous Current13.6 Amps
    Voltage380-400V / 3 / 50Hz
    Motor TypeDOL
    Crankcase Heater230V / 1 / 50Hz 120w
    Fan Motors
    Total FLA6 Amps
    Quantity2
    Diameter500 mm
    Voltage230V / 1 / 50Hz
    Sound Data
    High Speed64 dB(A)
    Speed Controlled55 dB(A)
  • Compressor Model4EES6Y
    Compressor ContactorMC22B240V
    Compressor Electronic OverloadGMP223P22A
    Circuit Breaker Control CircuitPLSMD4
    Circuit Breaker Condenser FansPLSMD16
    Liquid Receiver1320620A
    Receiver Outlet ValveR051FB2DS
    Receiver Outlet Gasket020002800PK
    Unit Electrical BoxEUR604015
    Liquid Line Drier / Sight Glass ComboCSG165S
    Suction Accumulator1010853P
    Unit Start Delay TimerICM105
    Oil Reservoir Separator Combo (no float)30718E1
    Compressor CRII Solenoid Valve34760147
    Oil Level Monitor / Regulator (DEKA)308COM1230
    Compressor Oil Monitor34731602
    Oil Return StrainerSH9105
    Low Pressure ControlSNSC106X
    High Pressure ControlSNSC130X
    CM-RC-01 Control Module34702850
    Compressor Head Cooling FanW1G130AA2511
    Low Pressure Transducer (Carel)SPKT0143P0
    High Pressure Transducer (Carel)SPKT0033P0
    Condenser Fan Model (ebm)S4E500AM0301
    Fan Speed ControllerRGEZ1Q45MFQ1
    TD Case ModelMP27
  • Enthalpy_TD-B
  • (B34)TD5HPto7HP Units-AC-CRII-DN33-DEKA (23
  • R404A
    Ambient (°C)Refrigeration Capacity (w)
    Evaporating Temperature (°C)
    -40-35-30-25-20-15-10-505
    32321443005594711288681087613139156611844521482
    3828343823500163837978979811844141201662219340
    4325113420450157687228889010755128241508917542

    Note:

    Nominal ratings should be used as a guide, based on 20 degree Celsius return vapour and inherent liquid subcooling.
    Compressor fitted with CRII 10-100% capacity regulation (CM-RC-01 module controlled by Carel DN33) & head cooling fan
    1 phase AC fans are speed controlled via Saginomiya RGEZ controller
    Saginomiya fan speed controller is set for continuous running @ low speed, select fan OFF option at low speed in low ambient applications to prevent over condensing.
    Fitted with suction accumulator, liquid receiver, liquid line drier & sight glass combo
    Fitted with oil reservoir/separator combo, DEKA oil level regulator & oil return strainer
    Requires additional cooling &/or return vapour limitations - Contact Airefrig Australia for further information.
    R507
    Ambient (°C)Refrigeration Capacity (w)
    Evaporating Temperature (°C)
    -40-35-30-25-20-15-10-505
    32321443005594711288681087613139156611844521482
    3828343823500163837978979811844141201662219340
    4325113420450157687228889010755128241508917542

    Note:

    Nominal ratings should be used as a guide, based on 20 degree Celsius return vapour and inherent liquid subcooling.
    Compressor fitted with CRII 10-100% capacity regulation (CM-RC-01 module controlled by Carel DN33) & head cooling fan
    1 phase AC fans are speed controlled via Saginomiya RGEZ controller
    Saginomiya fan speed controller is set for continuous running @ low speed, select fan OFF option at low speed in low ambient applications to prevent over condensing.
    Fitted with suction accumulator, liquid receiver, liquid line drier & sight glass combo
    Fitted with oil reservoir/separator combo, DEKA oil level regulator & oil return strainer
    Requires additional cooling &/or return vapour limitations - Contact Airefrig Australia for further information.
    R449A
    Ambient (°C)Refrigeration Capacity (w)
    Evaporating Temperature (°C)
    -40-35-30-25-20-15-10-505
    32249735324780626480071002912355150051799721348
    3821623110425956317246912611291137601654719665
    4318962771383751156625838410414127281533918258

    Note:

    Nominal ratings should be used as a guide, based on 20 degree Celsius return vapour and inherent liquid subcooling.
    Compressor fitted with CRII 10-100% capacity regulation (CM-RC-01 module controlled by Carel DN33) & head cooling fan
    1 phase AC fans are speed controlled via Saginomiya RGEZ controller
    Saginomiya fan speed controller is set for continuous running @ low speed, select fan OFF option at low speed in low ambient applications to prevent over condensing.
    Fitted with suction accumulator, liquid receiver, liquid line drier & sight glass combo
    Fitted with oil reservoir/separator combo, DEKA oil level regulator & oil return strainer
    Requires additional cooling &/or return vapour limitations - Contact Airefrig Australia for further information.
    R513A
    Ambient (°C)Refrigeration Capacity (w)
    Evaporating Temperature (°C)
    -25-20-15-10-50510
    32413553336739837010244123771477917464
    3837434855615976739409113821360316077
    4334174458567870948716105561262514926

    Note:

    Nominal ratings should be used as a guide, based on 20 degree Celsius return vapour and inherent liquid subcooling.
    Compressor fitted with CRII 10-100% capacity regulation (CM-RC-01 module controlled by Carel DN33) & head cooling fan
    1 phase AC fans are speed controlled via Saginomiya RGEZ controller
    Saginomiya fan speed controller is set for continuous running @ low speed, select fan OFF option at low speed in low ambient applications to prevent over condensing.
    Saginomiya fan speed controller will require to be adjusted to suit R513a refrigerant at time of commissioning.
    Fitted with suction accumulator, liquid receiver, liquid line drier & sight glass combo
    Fitted with oil reservoir/separator combo, DEKA oil level regulator & oil return strainer
    Requires additional cooling &/or return vapour limitations - Contact Airefrig Australia for further information.
    R134A
    Ambient (°C)Refrigeration Capacity (w)
    Evaporating Temperature (°C)
    -25-20-15-10-50510
    3237624918629078999764119041433717076
    3834124493577372769016110111327515821
    4331224139534667608397102711239714783

    Note:

    Nominal ratings should be used as a guide, based on 20 degree Celsius return vapour and inherent liquid subcooling.
    Compressor fitted with CRII 10-100% capacity regulation (CM-RC-01 module controlled by Carel DN33) & head cooling fan
    1 phase AC fans are speed controlled via Saginomiya RGEZ controller
    Saginomiya fan speed controller is set for continuous running @ low speed, select fan OFF option at low speed in low ambient applications to prevent over condensing.
    Saginomiya fan speed controller will require to be adjusted to suit R134a refrigerant at time of commissioning.
    Fitted with suction accumulator, liquid receiver, liquid line drier & sight glass combo
    Fitted with oil reservoir/separator combo, DEKA oil level regulator & oil return strainer
    Requires additional cooling &/or return vapour limitations - Contact Airefrig Australia for further information.

My Comparison List

Compare Clear all
Sorry, you can only compare products from the same category.